CI541V1 3BSE008572R1 ABB PROFIBUS DP communication interface module

CI541V1 3BSE008572R1 ABB PROFIBUS DP communication interface module

Product Overview

ABB CI541V1 is a PROFIBUS DP slave communication interface module specially designed for ABB Advant Controller 160 / AC 110 series programmable controllers. This module enables the AC 160/AC 110 controller to access the PROFIBUS master network (such as Siemens S7, ABB AC 800M + CI854A, etc.) as a standard PROFIBUS DP slave station. Achieve efficient data exchange with upper-level PLC, DCS or SCADA systems.

Core features

PROFIBUS DP slave station function: Compliant with EN 50170 standard, supports standard PROFIBUS DP protocol
High-density I/O mapping: Supports up to 244 bytes of input + 244 bytes of output data exchange
Plug-and-play design: Directly installed on the AC 160/AC 110 controller I/O rack and powered by the backplane
DIP switch configuration station address: PROFIBUS station number can be set without software (address range 1-126)
LED status indication
PWR: Power supply is normal
RUN: The module is running
SF (System Fault) : Communication or configuration error
BF (Bus Fault) : PROFIBUS bus fault
Electrical isolation: 500V isolation is provided between the PROFIBUS interface and the internal logic circuit
9-pin D-SUB interface: Standard PROFIBUS connector (female), compatible with A/B type shielded twisted pair cables

Typical application scenarios
Connect the old AC 160 control system to the modern PROFIBUS network (such as connecting the Siemens S7-300/400 master station)
In the water plant pumping station, the local AC 110 controller is connected to the central DCS as a slave station
In papermaking or packaging production lines, centralized monitoring of multiple AC 160 control units and the main PLC is achieved
Replace hardwiring in industrial transformation projects to reduce wiring costs and enhance data transparency

Technical parameters

Model: CI541V1

Order Number: 3BSE008572R1

Product Name: PROFIBUS DP Slave Communication Interface Module

Applicable systems: ABB Advant Controller 160 / AC 110 series

Communication protocol: PROFIBUS DP (Slave mode, Class 1)

PROFIBUS interface: 1 × RS-485, 9-pin D-SUB (female connector)

Maximum baud rate: 12 Mbps (automatically recognizes the master station rate)

Station address setting: 6-position rotary DIP switch (1-126)

I/O data capacity: Maximum 244 bytes input + 244 bytes output

Product Images

Related Products

ABB PROFIBUS DP interface module

CI541V1 communication module

ABB spare parts PROFIBUS DP

CI541V1 3BSE008572R1 ABB PROFIBUS DP communication interface module Images