AO810V2 3BSE038415R1 ABB Analog output module AC 800M System 800 A8

AO810V2 3BSE038415R1 ABB Analog output module AC 800M System 800 A8

The ABB AO810V2 is the second-generation 8-channel analog output module in the AC 800M distributed control system, specifically designed for 4-20mA signal output applications in industrial automation. As an upgraded version of the classic AO810, the AO810V2 maintains high compatibility while optimizing diagnostic functions, anti-interference capabilities, and long-term stability. It is suitable for driving field devices such as electric control valves, frequency converters, actuators, and recorders.

Core features

8-channel independent analog output
Output signal: 4-20 mA (default), which can be configured by software as 0-20 mA
Load capacity: Maximum 750 Ω (@24V DC)
Output accuracy: ±0.1% of span (typical value, 25°C)
High-reliability design
Electrical isolation between channels: ≥ 500 V AC
Short-circuit protection: All output channels are equipped with automatic current limiting and recovery functions
Open circuit detection: Optional to enable (through software configuration)

Technical parameters

Process control loop: Electrical valve positioner (I/P converter) for driving pneumatic control valves
Motor speed control system: Sends a 4-20mA speed setting signal to the frequency converter
Boiler and Combustion control: Adjust the opening degree of the fuel valve and the position of the damper
Water treatment plant: Control the stroke of the dosing pump and the dosage of flocculant
Test and calibration bench: Serves as a standard signal source to output precise current values

Installation and Usage instructions
Hardware installation
Insert the AO810V2 into the S800 I/O electronic rack (such as TB840A);
Connect to the CI854A (optical fiber) or CI801 (electrical) communication module via the ModuleBus cable;
Connect the output terminals to the on-site execution equipment using shielded cables.
Software configuration
Create an instance of the AO810V2 device in Control Builder M;
Set for each channel:
Output range (4-20 mA or 0-20 mA
Engineering units (%, Hz, °C, etc.)
Alarm limit values and fault actions (such as output hold/reset to zero during a fault)
Enable the "Open Circuit Detection" function (optional);
Download the configuration to the AC 800M controller.
Debugging and verification
The green LED on the front panel indicates that the module is operating normally.
If a certain channel is short-circuited, the corresponding channel will limit the current and report the fault.
Loop testing can be performed by forcing the output value through Control Builder M.

Product Images

Related Products

ABB Analog output module AC 800M

ABB 800xA system spare part

ABB A8 module with warranty

AO810V2 3BSE038415R1 ABB Analog output module AC 800M System 800 A8 Images