DI801 3BSE020512R1 ABB High-density intelligent analog output module AC 800M System 800A

AO845A 3BSE045584R1 ABB High-density intelligent analog output module AC 800M System 800A

Product Overview

The ABB DI801 is a classic 16-channel digital input module in the AC 800M distributed control system, specifically designed for the highly reliable acquisition of discrete signals such as switch status, alarm signals, and equipment operation/fault feedback in industrial environments. This module supports 24V DC active or passive (dry contact) input, and features channel-level photoelectric isolation, reverse polarity protection and intelligent diagnostic functions. It is suitable for various automation scenarios such as power, water treatment, mechanical manufacturing and material conveying.

Core features

16 independent digital input channels
Input type: 24V DC (compatible with active signals or passive dry contacts)
Input voltage range: 15-30 V DC (ON), < 5 V DC (OFF)
Input current: approximately 3.5 mA @ 24 V DC
High-reliability isolation design
Photoelectric isolation is achieved between the channel and the backplane
Isolation voltage: ≥ 500 V AC (1 minute)
Surge resistance: ±4 kV (IEC 61000-4-5)
Intelligent diagnostic function
Real-time monitoring of the input signal status
Support channel-level open/short circuit detection (requires coordination with external pull-up/pull-down circuits)
Fault information is simultaneously reported through the LED on the front panel and the DCS alarm system

Technical parameters

Motor status monitoring: Collect operation/stop/fault signals (from the auxiliary contacts of the contactor
Safety and interlock circuits: Status feedback for limit switches, access control switches, and emergency stop circuits
Pump station and fan control: Signal input for liquid level switch, pressure switch and flow switch
Material conveying system: photoelectric sensor, proximity switch, encoder pulse counting
Energy management: Circuit breaker opening and closing positions, transformer temperature control alarm

Installation and Usage instructions
Hardware installation
Insert DI801 into the S800 I/O electronic rack (such as TB840A);
Connect to the CI854A (optical fiber) or CI801 (electrical) communication module via the ModuleBus cable;
For dry contact input, a 24V query power supply needs to be provided either inside or outside the module (usually pulled up from the system power supply through a resistor).
Software configuration
Create a DI801 device instance in Control Builder M;
Name each channel (such as "Pump1_Run_FB");
Optional "Filter time" can be enabled to suppress jitter (default: 1-10 ms);
Download the configuration to the AC 800M controller.
Debugging and verification
The green LED on the front panel indicates that the module is operating normally.
Each channel corresponds to a status indicator (some versions have channel leds or can be viewed through software).
The input status can be forced in Control Builder M for logical testing.

Product Images

Related Products

ABB AC 800M analog output module

high-density ABB 800A module

intelligent ABB DI801 output module

DI801 3BSE020512R1 ABB High-density intelligent analog output module AC 800M System 800A Images