AI815 3BSE052604R1 ABB High-density analog input module AC 800M System 800xA
Product Overview
The ABB AI815 is a high-density 16-channel analog input module in the AC 800M distributed control system, specifically designed for the acquisition of 4–20 mA signals in industrial process automation. This module features tool-free spring terminal connection technology, significantly enhancing on-site wiring efficiency and reliability. It natively supports transparent HART digital communication, allowing diagnostic and configuration data from smart transmitters to be directly transmitted to the upper-level system (such as System 800xA Asset Optimizer).
Core features
High channel density:
16 independent analog input channels
Supports 4–20 mA current signals (active/passive compatible)
Input impedance: < 250 Ω (ensuring no impact on loop power supply)
HART transparent transmission:
Each channel supports HART 5/6/7 protocol digital signal superposition
No additional hardware required, HART data directly passes to the controller
Compatible with mainstream HART transmitters (pressure, temperature, flow, etc.)
Technical parameters
Intelligent instrument integration: Connect HART pressure/temperature/level transmitters to achieve remote calibration and predictive maintenance
Process control station: High-density collection of key parameters such as reaction vessels, distillation towers, and boilers
Energy management system: Centralized monitoring of power quality, steam flow, and cooling water temperature
Water treatment plant: Simultaneous collection of multiple parameters such as pH, turbidity, and residual chlorine
Renovation of old DCS: Replacing traditional low-density I/O modules with high cost performance
Installation and Usage instructions
Hardware installation
Insert AI815 into the S800 I/O electronic frame (such as TB840A/TB842A);
Ensure correct connection with the CI854A (optical fiber) or CI801 (electrical) communication module;
Crimping the 4-20mA signal line on site with spring terminals (shielded twisted pair is recommended).
Software configuration
Add the AI815 device in Control Builder M;
Automatically identify the number of channels and HART capability;
Configure the measurement range, engineering unit, and alarm limit value;
Enable HART variable mapping (such as the main variable PV, device status).
Debugging and verification
The green LED on the front panel indicates that the module is operating normally.
A red LED flashing indicates a channel fault (such as a disconnection);
View real-time values and HART diagnostic data through the System 800xA screen or Asset Optimizer.
Product Images
Related Products
| AI810 | AI815 |
| AI820 | AI825 |
| AI830 | AI835 |
| AO810 | AO815 |
| AO820 | DI810 |
| DI811 | DI820 |
| DO810 | DO814 |
| DO820 | TU810 |
| TU831 | TB820 |
| CI854 | PM864 |
Product Tags:
|
|
AI815 3BSE052604R1 ABB High-density analog input module AC 800M System 800xA Images
|
