SB822 3BSE018172R1 ABB Electronic rack AC 800M S800 I O Supports 8 I O modules

TU830V1 3BSE013234R1 ABB Electronic rack AC 800M S800 I O Supports 8 I O modules

Product Overview

ABB SB822 is an 8-slot I/O electronic rack (base plate) specially designed for S800 I/O systems, supporting horizontal installation. It can accommodate up to 8 S800 I/O modules (such as DI801, DO810, AI810, AO810, etc.) and provide power distribution and high-speed data communication channels through the built-in ModuleBus bus. The SB822 is mainly used to integrate multiple I/O modules into a compact unit and connect to the AC 800M controller or System 800xA system via the CI801 or CI854A communication interface module.

Core features

8-slot design
Up to 8 S800 I/O modules can be installed
Support hybrid configuration (free combination of DI/DO/AI/AO)
Module hot-swapping support (software enablement required)
Integrated power distribution
Obtain + 5V and ± 15V logic power supplies from the system through the CI module
Provide stable power supply for all I/O modules without the need for additional power modules
Horizontal installation structure
Suitable for standard cabinet layout, it is convenient for maintenance and expansion
The modules are arranged horizontally, which is conducive to heat dissipation and wiring

Technical parameters

Small and medium-sized DCS sites: boiler auxiliary machines, pump stations, fan control cabinets
OEM machinery and equipment: Local I/O stations for packaging machines, filling lines, and material sorting systems
Water and sewage treatment plants: Signal acquisition and control in dosing rooms, filter tanks, and sludge dewatering rooms
Energy management system: Substation auxiliary signals, diesel generator monitoring
Renovation project: Replace the old PLC I/O and expand the control points by utilizing the existing AC 800M architecture

Installation and Usage instructions
Hardware installation
Fix the SB822 on the DIN rail;
Install the CI801 (electrical) or CI854A (optical fiber) communication module in the leftmost slot.
Insert up to 8 S800 I/O modules (such as DI801, DO810, etc.) in sequence on the right side.
Connect the CI module to the AC 800M controller using the ModuleBus cable.
Software configuration
Create an I/O station in Control Builder M and select the SB822 baseboard type;
The software automatically identifies the model of the inserted module and the number of channels.
Assign a label to each channel (such as "Pump_Start_FB");
Download the configuration to the controller, and the system will automatically activate the I/O station.
Debugging and verification
A constantly lit RUN light in the CI module indicates normal communication.
The status of the I/O module can be monitored in real time through software.
Supports online forced input/output for convenient loop testing.

Product Images

Related Products

ABB AC 800M S800 I O rack

SB822 electronic rack with warranty

ABB spare parts I O modules

SB822 3BSE018172R1 ABB Electronic rack AC 800M S800 I O Supports 8 I O modules Images